Automatic bilateral multi-bending machine for PMMA, PC, PVC and other thermoplastic plates.
Marok PMF-3000 bending machine is designed to make multiple bents on plastic sheets (PVC, PP, PE, etc), with a maximum length of 3 mt and thickness up to 15 mm. You can perform each type of bend, from L-shaped ones, up to closed hexagonal in an automatic manner.
Each bending angle may be set from 0° to 95°.
With PMF-3000 you have only to specify the number of bents, the distance between them, and each angle you want. You can choose even the curvature of material. The machine remember each bend-sequence used, so you specify the sequences only one time, and use them forever!
The machine is automatically operated by an industrial computer programmed to follows perfect-welding principle. Thanks to LCD monitor, touch-screen technology and the high specialized control software, the system is very easy to use. All the options are available by touch and go technology.
The ease of use of the computerized system makes possible,
even for non-specialist operators, to plan and carry out all the working
processes from the command console. Once the working cycle has been started
up, the operator can carry out other tasks while waiting for the end of
the cycle. The extraction of the bended sheet is very easy, even for closed
The Marok PMF-3000 bending machine allows to:
Marok PMF-3000 heat the material in the upper and lower
side in the bending point.
You can choose from various type of upper heating bars; each type conforms to a particular bend shape. If you want minimal curvature, mount the “V type” bar. If you want maximum curvature, mount the “infrared type” bar.
Thanks to the closed circuit cooling system, the machine heat the material only where needed; all this to obtain better bend.